Custom Sports Flooring — Factory Direct Black-belt owned. Cut to any shape. Design yours in 60 seconds.
Design Your Own → 📞 737-237-8693 💬 Text us

QUALITY THAT SUPPORTS YOUR PERFORMANCE

QUALITY THAT SUPPORTS YOUR PERFORMANCE

A rubber floor roll being unrolled across a gym floor

ATX Mats rubber floor rolls are made from reclaimed rubber and EPDM. Each roll is 1 m wide and 10 m long, thin enough to run continuously across a gym floor with minimal seams.

Who they are for

Cardio rooms, functional-training areas, group-fitness studios and any space where a thinner, seamless-looking rubber surface is more important than the deep shock absorption of a thicker tile. Rolls give you a large continuous surface with fewer edges to catch equipment on.

Thickness

Rolls are available from 3 mm up to 12 mm. Thinner rolls fit under cardio equipment where clearance matters; the thicker end of the range handles moderate dropped-weight zones.

How they install

Rolls are stuck down with an adhesive on a prepared subfloor. This is a permanent install — once the adhesive cures the roll is bonded to the subfloor and is not designed to be lifted and re-used elsewhere.

Close-up of two rubber rolls meeting at a seam after installation

Colours

The line uses the same 32 colourways as the rubber tiles: CO-01 through CO-32, in solid and flecked variants (black, charcoal, greys, forest green, olive, terracotta, burgundy, midnight blue, chocolate brown and speckle combinations).

What to know before ordering

Measure the room and add for cuts along walls and around fixed equipment. Because rolls are 1 m wide, seams run every metre; plan seam direction so seams run parallel to the busiest traffic line.

Specs

SpecValue
MaterialReclaimed rubber and EPDM
Roll dimensions1 m × 10 m (39.3 in × 393 in) per roll
Roll thickness3–12 mm
Install methodGlue-down with adhesive
Colour options32 solid and flecked colourways (CO-01–CO-32)

FAQ

Can I lay rolls loose without adhesive?
The install method for rolls in the ATX Mats catalogue is glue-down. Loose-lay is not the intended install.

How do I clean them?
Rolls take a routine damp mop; approved cleaning products are confirmed with your order.

What warranty comes with them?
Warranty terms are confirmed on the quote.

Can I take up a roll and re-install it in a new space?
Rolls are glued down. Once bonded they are not designed to be lifted and re-laid.

Order

Rubber floor rolls are quote-based. Send your room size and use and the ATX Mats team will spec thickness and colourway and the adhesive to match: request a quote.

Custom Facility Design